Does Your Inner West Bathroom Renovation Need the Concrete Floor Bonded to Earth?
Does your Inner West bathroom renovation need the concrete floor's reinforcing mesh bonded to earth? Yes, where the floor or wall of a room containing a shower or bath has conductive reinforcing, such as steel mesh in a concrete slab or screed, AS/NZS 3000 Clause 5.6.2.5 requires that reinforcing to be bonded to your switchboard's earthing system. This is a different requirement to the household pipework bonding rule, and it is an easy one to miss on a terrace bathroom renovation where a timber floor is being replaced with a new concrete slab for waterproofing and underfloor heating.
1. What This Bonding Requirement Actually Covers
AS/NZS 3000 Clause 5.6.2.5 deals specifically with showers and bathrooms. Where a concrete floor or wall in a room containing a shower or bath has conductive reinforcing inside it, that reinforcing must be connected back to the earthing system of your electrical installation by its own equipotential bonding conductor. The reasoning is straightforward: a damp bathroom is exactly the environment where a voltage difference between the concrete's embedded steel and your home's earthed circuits becomes genuinely dangerous, so the rule removes that risk by tying everything to the same reference point.
A conductive grille or reinforcement mesh laid in the floor can be used for this purpose, and the standard specifically recognises that the tie wires used to join reinforcing bars together during construction count as an adequate bond between them, so long as the whole mesh is electrically continuous. That means one correctly placed connection point is usually enough for an entire bathroom slab, not a connection at every corner.
2. How This Differs From Bonding Your Pipework
It is worth being clear about what this rule does not cover. Our guide to equipotential bonding for metal pipework covers the separate requirement for bonding accessible metal water and gas piping to your earthing system. That rule is about pipes. This one is about structural reinforcing inside a concrete floor or wall. A terrace bathroom renovation can easily need both, a bonded water pipe and a bonded slab, and meeting one does not automatically satisfy the other, since they are assessed and wired as two distinct connections back to the same earth bar.
3. Why Inner West Terrace Renovations Trigger This So Often
A huge share of Inner West bathroom renovations on original terrace stock involve replacing an old timber subfloor with a new concrete slab, usually to allow for a level entry shower, proper waterproofing membranes, or hydronic underfloor heating. The moment that reinforcing mesh goes into the new slab, this requirement is live for that room, regardless of whether the original bathroom ever had it. It is also common on a Marrickville, Leichhardt, Balmain or Petersham terrace where a rear addition or a full bathroom rebuild pours a new slab well away from the original footprint of the house, which is precisely the kind of work where an electrician needs to be looped in before the concrete goes down, not after.
Because the bonding connection has to reach the reinforcing itself, this is a detail that has to be planned with the builder and the concreter, not added as an afterthought once the slab is finished and tiled over. Missing it at this stage usually means breaking into a finished floor later to fix it properly.
4. What a Compliant Connection Actually Looks Like
A proper bonding conductor is connected between the reinforcing material and your main earthing system, sized correctly for the installation, with the connection point established before the slab is poured and the steel is covered. Where a combined outbuilding contains more than one room with a shower or bath, each structure generally needs its own individual bonding connection, unless the reinforcing is electrically continuous across the whole structure, in which case one bonding conductor back to the supplying switchboard's earth bar is enough.
This is also where the existing versus new distinction genuinely matters. The rule exists for new work, and an older bathroom that was built before this expectation was standard practice is not automatically non compliant. It is, however, worth adopting wherever practicable, which in plain terms means raising it with your electrician any time an existing bathroom floor is being opened up or replaced as part of a renovation, rather than leaving a known gap in place simply because it predates the rule.
5. Where This Fits Alongside the Rest of Your Renovation
A bathroom renovation is rarely just a bathroom renovation on an original Inner West terrace. It often coincides with a broader switchboard upgrade, new circuits for underfloor heating or a heated towel rail, and sometimes a wider check of the home's earthing and MEN system if the switchboard itself is original to the house. Raising the concrete floor bonding question at the same time as these other items means one electrician visit covers the lot, rather than discovering a compliance gap during a later electrical safety inspection.
If your renovation also touches a plunge pool, spa or outdoor wet area at the same time, note that pools and spas carry their own stricter bonding standard again, covered separately in our guide to plunge pool and spa electrical clearance rules, rather than the bathroom specific rule covered here.
How Does High Demand Electrical Help With Bathroom Bonding?
High Demand Electrical is a licensed local team, not a call centre, and one of Sydney's most trusted Level 2 ASPs for Inner West terrace renovations across Marrickville, Leichhardt, Balmain and the surrounding suburbs. When a bathroom renovation involves a new concrete slab, we coordinate directly with your builder and concreter to get the bonding connection placed correctly before the floor is covered, rather than leaving it as a problem to solve after the tiling is finished. We check for this alongside pipework bonding, earthing and switchboard condition on every renovation and electrical safety inspection we carry out, so nothing gets missed between trades.
Frequently Asked Questions
Planning a Bathroom Renovation With a New Concrete Floor?
Get an Electrical Safety Inspection Quote or call 0402 808 808. Every job needs a proper site assessment before scope or pricing can be confirmed, and timing the bonding connection correctly against your builder's concrete pour matters more than almost anything else in this job.
Related reading: equipotential bonding for metal pipework and earthing and the MEN system in older terraces. On the Power Pole site: private power pole earthing and the MEN system. On the main site: Level 2 electrician services in Sydney.
Powering Your Needs with Expertise
If you want a reliable, experienced, and prompt electrician, High Demand Electrical Inner West is the one to call. We cover every electrical need — routine maintenance, emergency repairs, full system installs — and our team is focused on keeping your setup running smoothly. Small task or big project, give us a ring today.

